Ruckus ZoneFlex H510

Ruckus ZoneFlex H510 Series, pret Ruckus ZoneFlex H510, specificatii tehnice

ZoneFlex H510 Multiservice 802.11ac Wave 2 Wired/Wireless Wall Switch
BeamFlex+, 1 10/100/1000 & 4 10/100/1000 Ethernet Access Ports, POE in, PoE out (one port), USB port. Does not include DC power supply.
*At least 1 Year of Support is recommended with your AP purchase.

Ruckus ZoneFlex H510



High Performance 802.11ac Wave 2 Integrated Wired/wireless Wall Switch

The ZoneFlex H510 is the industry’s first Wave 2 802.11ac wired and wireless wall switch using Ruckus’ patented BeamFlex+ adaptive antenna technology to deliver high-speed 802.11ac Wi-Fi in an ultra-sleek, low-profile design that can be discretely installed over a standard electrical junction box. Ideal for offering converged services in hotel guest rooms, student residences, and multi-dwelling units, the ZoneFlex H510 provides an easy way to offer multiple connections in a single room without multiple cables.

The ZoneFlex H510 supports Multi-User MIMO (MU-MIMO) as a Wave 2 solution and can increase network throughput by transmitting to two Wave 2 clients at the same instant in time. This efficient utilization of the Wi-Fi channel boosts performance for Wave 2 clients but also frees up airtime for all clients, which means even non-Wave 2 clients see a performance benefit.

The “mobile device ready” ZoneFlex H510 with BeamFlex+ adapts in real time to client device location and physical orientation, delivering consistent Wi-Fi performance. The BeamFlex+ adaptive antenna system of the ZoneFlex H510 is optimized to deliver best-in-class Wi-Fi coverage and performance in hotel guest rooms and MDU residences.

Equipped with four Ethernet ports for in-room access, the ZoneFlex H510 can be used to connect a range of wired network devices such as IPTV set top boxes, IP telephones, or networked minibars while simultaneously providing dual band 802.11ac wireless LAN coverage. An IEEE 802.3af-compliant Power-over-Ethernet (PoE) port on the H510 allows devices such as IP telephones to be powered directly from the wall switch. The H510 itself may be powered via standard PoE or a DC power adapter.

The ZoneFlex H510 offers maximum flexibility and future-proofed utility. It is designed to securely support future add-on radio modules for wireless connectivity beyond best-in-class Wi-Fi. The cable pathways at the rear, support legacy cabling such as RG6 or CAT3/CAT5. Existing services such as video and voice over Ethernet can co-exist within the same junction box, reducing both installation time and construction costs. The H510 can be deployed as a standalone device or centrally managed by SmartZone, ZoneDirector, or FlexMaster management platforms.

ZoneFlex H510 Specifications
Physical Characteristics
  • POE 802.3af/802.3at
  • 48VDC input
Physical Size 90 mm x 145 mm x 29 mm
  • 230 g
  • 292 g with bracket
Physical Ports
  • 4 10/100/1000 Mbps Base-T 802.3, 802.3u, RJ-45 Ethernet access ports.
  • 1 10/100/1000 Mpbs Base-T 802.3, 802.3u, 802.3ab, 802.3af (802.3at class 4) PoE input, RJ-45
  • USB 2.0
Mounting Options
  • Electrical wallbox; Standard US and EU single gang wall jack
  • Optional bracket for offset & wall mount
Environmental Conditions
  • Operating Temperature: 32°F (0°C) – 104°F (40°C)
  • Operating Humidity: 15% – 95% non-condensing
Power Draw
  • Idle: 6.5 W
  • Typical: 7.3 W
  • Peak, no PoE out load: 9.2W

Max load on PoE out:

  • 4W with 802.3af for PoE
  • 12.95W with 802.3at PoE in
Minimum Rx Sensitivity Up to -99dBm
Beamflex1 Sinr Tx Gain 2dB
Beamflex1 Sinr Rx Gain 3-5dB (PD-MRC)
Interference Mitigation 5dB
Performance And Capacity
Concurrent users 100
Voice Calls 30
BSSID 8 BSSIDs per radio
Multimedia And Quality Of Service
802.11e/WMM Supported
Software Queues Per traffic type (4), per client
Traffic Classification Automatic, heuristics and TOS based or VLAN-defined
Rate Limiting Dynamic, per-user or per-WLAN
Network Architecture
IP IPv4, IPv6, dual-stack
  • 802.1Q (1 per BSSID or dynamic, per user based on RADIUS)
  • Port-based
802.1X For Ethernet Ports
  • Authenticator
  • Supplicant
Deployment Options
  • Standalone (individually managed)
  • Managed by ZoneDirector
  • Managed by SmartZone
  • Managed by FlexMaster
  • Web User Interface (HTTP/S)
  • CLI (Telnet/SSH), SNMP v1, 2, 3
Standards IEEE 802.11a/b/g/n/ac
Mimo Configuration
  • 2 x 2 : 2 SU-MIMO
  • 2 x 2 : 2 MU-MIMO
Supported Data Rates
  • 802.11n/ac: 6.5Mbps – 173.4Mbps (20MHz)
  • 13.5Mbps – 400Mbps (40MHz)
  • 29.3Mbps – 867Mbps (80MHz)
  • 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
  • 802.11b: 11, 5.5, 2 and 1 Mbps
  • 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
Rf Power Output* (Aggregate)
  • 2.4 GHz: 18dBm
  • 5.0 GHz: 22dBm
Channelization 20MHz, 40MHz, 80MHz
Frequency Band
  • IEEE 802.11 b/g/n: 2.4 – 2.484 GHz
  • IEEE 802.11a/ac: 5.15 – 5.25 GHz; 5.25 – 5.35 GHz;
Operating Channels
  • 2.4GHz : 1-13
  • 5GHz : 36-64, 100-140, 149-165
  • Channel availability is country dependent according to ocal regulations
Wireless Security
  • WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
  • Authentication via 802.1X with ZoneDirector, local authentication database, support for RADIUS, LDAP,and Active Directory

NetSafe este distribuitor in Romania pentru: 

Fortinet, Juniper Networks, Barracuda Networks, Ruckus Commscope, Keysight, A10 Networks, Nomadix, Fidelis Cybersecurity

Daca doriti sa deveniti reseller NetSafe click aici : Pagina de reseller


pentru mai multe detalii va rugam sa ne contactati

Sediul Netsafe

Addresa: Bdul Nicolae Caramfil 71-73, Bucuresti, Romania, 014142

Telefon: +40 21 224139

Email vanzari: sales @

Email support tehnic: suport @

Deschide ticket support: