Ruckus ZoneFlex C110

Ruckus ZoneFlex C110 Series, pret Ruckus ZoneFlex C110, specificatii tehnice


ZoneFlex C110 Multi-Service 802.11ac Wall Plate Cable Modem Access Point
*At least 1 Year of Support is recommended with your AP purchase.

Ruckus ZoneFlex C110

zf-c110[1]

Overview:

High Performance 802.11ac Wave 2 Integrated Wired/Wireless Wall Switch with DOCSIS 3.0 Connectivity

The ZoneFlex C110 is an unprecedented, highly-integrated cable modem access point designed to deliver best-in-class Wi-Fi connectivity over building-scale DOCSIS infrastructure. The C110 features a two-spatial-stream 802.11ac Wave 2 capable access point, integrated Ethernet switch, and DOCSIS 3.0 cable modem, all in a sleek, low-profile wall plate form factor that can be discretely installed over a standard electrical junction box.

The ZoneFlex C110 has been engineered from the ground up to provide a single box solution specifically to support Wi-Fi deployments in buildings with pre-existing coaxial cabling. Ideally suited for hotels, multi-dwelling-units (MDUs), and student residences where the cost of pulling new data cabling otherwise prohibits Wi-Fi installation, the C110’s integrated DOCSIS 3.0 cable modem provides reliable Wi-Fi backhaul over existing coaxial cabling to an in-building or off-premise CMTS.

A dual-band wireless access point with 802.11ac Wave 2 Multi-User MIMO (MU-MIMO) support, the C110 delivers outstanding Wi-Fi performance. Efficient airtime utilization due to MU-MIMO boosts performance for Wave 2 clients while also freeing up airtime for non-Wave 2 clients, which means all clients enjoy a performance benefit.

The “mobile device ready” ZoneFlex C110 features Ruckus patented BeamFlex+ smart antennas, which adapt in real time to client device location and physical orientation, delivering consistent and reliable Wi-Fi performance. The BeamFlex+ adaptive antenna system of the ZoneFlex C110 is optimized for coverage in hotel guest rooms and MDU residences.

Equipped with two Ethernet ports for in-room access, the ZoneFlex C110 can be used to connect a range of wired network devices such as: IPTV set-top boxes and VoIP telephones, while simultaneously providing dual band 802.11ac wireless LAN connectivity. The C110 is powered via a 12V DC power adapter via a discrete and secure connection. Cable channels on the back of the C110 provide added installation flexibility and preserve access to legacy behind-wall cabling.

The ZoneFlex C110 can be deployed as a standalone device or centrally managed by Ruckus SmartZone or ZoneDirector controller platforms.

ZoneFlex C110 Specifications
Physical Characteristics
Power DC Input: 12VDC 2.0A
Physical Size 180mm x 150mm x 35mm
Weight 386 g (13.62 oz)
Physical Ports
  • 2 auto MDX, auto-sensing 10/100 Mbps, RJ-45 port
  • DOCSIS/Euro DOCSIS 3.0 8×4 modem port, type F connector
  • USB 2.0
Mounting Options
  • Electrical wallbox; Standard US and EU single gang wall jack
  • Optional bracket for offset & wall mount
Environmental Conditions
  • Operating Temperature: 32°F (0°C) – 104°F (40°C)
  • Operating Humidity: 5% – 95% non-condensing
Power Draw
  • Idle: 8.5W
  • Typical: 11.1W
  • Peak: 17.2W
RF
Antenna BeamFlex+ adaptive antennas with polarization diversity
BeamFlex1 SINR TX Gain Up to 2 dB
BeamFlex1 SINR RX Gain 3-5 dB (PD-MRC)
Interference Mitigation 5 dB
Minimum Rx Sensitivity -96dBm(2.4GHz)/-95dBm(5 GHz)
Performance and Capacity
Concurrent Users Up to 100 clients per AP
Voice Calls Up to 30
Management
Deployment Options
  • Standalone
  • Managed by ZoneDirector
  • Managed by SmartZone
Configuration
  • Web User Interface (HTTP/S)
  • CLI (Telnet/SSH), SNMP v1, 2, 3
Auto Ap Software Updates FTP or TFTP
Cable Modem
DOCSIS Version 1.0/1.1/2.0/3.0 compliant and certified
Channel Bonding Supports 8 downstream channels and 4 upstream channels
Support and Managment
  • Embedded diagnostics web interface
  • Status LED’s
  • SNMP management
Wi-Fi
Standards
  • IEEE 802.11a/b/g/n/ac
  • 2.4GHz and 5GHz
Supported Data Rates
  • 802.11n/ac: 6.5Mbps – 173.4Mbps (20MHz)
  • 13.5Mbps – 400Mbps (40MHz)
  • 29.3Mbps – 867Mbps (80MHz)
  • 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
  • 802.11b: 11, 5.5, 2 and 1 Mbps
  • 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
Radio Chains 2 x 2
Spatial Streams 2
RF Power Output (Aggregate)
  • 19 dBm for 2.4GHz†
  • 22 dBm for 5GHz†
Channelization 20MHz, 40MHz, 80MHz
Frequency Band
  • IEEE 802.11 b/g/n: 2.4 – 2.484GHz
  • IEEE 802.11a/ac: 5.15 – 5.25 GHz; 5.25 – 5.35GHz; 5.47 – 5.725GHz; 5.725 – 5.85GHz
Operating Channels
  • US/Canada: 1-11, Europe ( ETSI X30): 1-13
  • 5 GHz channels: Country dependent
Smartmesh Networking Supported
Power Save Supported
Wireless Security
  • WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
  • Authentication via 802.1X, local authentication database, support for RADIUS, LDAP, and ActiveDirectory

NetSafe este distribuitor in Romania pentru: 

Fortinet, Juniper Networks, Barracuda Networks, Ruckus Commscope, Keysight, A10 Networks, Nomadix, Fidelis Cybersecurity

Daca doriti sa deveniti reseller NetSafe click aici : Pagina de reseller


Contact

pentru mai multe detalii va rugam sa ne contactati






Sediul Netsafe

Addresa: Bdul Nicolae Caramfil 71-73, Bucuresti, Romania, 014142

Telefon: +40 21 224139

Email vanzari: sales @ netsafe.ro

Email support tehnic: suport @ netsafe.ro

Deschide ticket support: http://support.netsafe.ro