Ruckus ZoneFlex H500 Series, pret Ruckus ZoneFlex H500, specificatii tehnice
ZoneFlex H500 Multiservice 802.11ac Wired/Wireless Wall Switch
*BeamFlex+, 1 10/100/1000 & 4 10/100 Ethernet Access Ports, POE in, PoE out (one port), USB port. Does not include DC power supply.
*At least 1 Year of Support is recommended with your AP purchase.
Ruckus ZoneFlex H500
High Performance 802.11ac Integrated Wired/Wireless Wall Switch
The ZoneFlex H500 is a dual-band dual-concurrent 802.11ac wall mounted wired switch and wireless wall access point in one form factor. The ZoneFlex H500 features integrated 2.4GHz and 5GHZ concurrent radios, five wired Ethernet ports, PoE ouput, and a passthrough feature for devices such as digital phones that require native access to a PBX system. Designed with hotels and multi-dwelling units in mind, the ZoneFlex H500 is easy to mount to an electrical junction box and has a sleek and low-profile form factor.
The H500 is using Ruckus’ patented BeamFlex+ adaptive antenna technology to deliver high-speed 802.11ac Wi-Fi in an ultra-sleek, low-profile design that can be quickly and discretely installed in a standard electrical junction box. Ideal for offering converged services in hotel guest rooms, student residences, and multi-dwelling units, the ZoneFlex H500 provides an easy way to offer multiple connections to a single room without multiple cables.
The ZoneFlex H500 features dual-polarized BeamFlex+ antennas, which adapt in real time to client device locations and physical orientations delivering consistent WiFi performance.
Equipped with four Ethernet ports for in-room access, the ZoneFlex H500 can be used to connect a range of wired network devices such as IPTV set top boxes, IP telephones, or networked minibars while simultaneously providing dual band 802.11ac wireless LAN coverage. An IEEE 802.3afcompliant Power-over-Ethernet (PoE) port on the H500 allows devices such as IP telephones to be powered directly from the wall switch. The H500 itself may be powered via standard PoE or a DC power adapter.
The ZoneFlex H500 is completely inconspicuous and secure, minimizing the protrusion off the wall to make in-room cabling and furniture arrangement simple. Cable channels on the back of the H500 support legacy cabling which enable new cable pulls to override existing services, streamlining installation options and reducing costs.
The H500 can be deployed as a standalone device or centrally managed by SmartZone, ZoneDirector, or FlexMaster management platforms.
|ZoneFlex H500 Specifications|
|Physical Size||90 mm x 171 mm, 29 mm|
|Minimum RX Sensitivity||Up to -99 dBi|
|BeamFlex1 SINR TX Gain||Up to 2 dB|
|BeamFlex1 SINR RX Gain||3-5 dB (PD-MRC)|
|Interference Mitigation||Up to 5 dB|
|Performance and Capacity|
|Concurrent Users||Up to 100|
|Voice Calls||Up to 30|
|Multimedia and Quality of Service|
|Software Queues||Per traffic type (4), per client|
|Traffic Classification||Automatic, heuristics and TOS based or VLAN-defined|
|Rate Limiting||Dynamic, per-user or per-WLAN|
|IP||IPv4, IPv6, dual-stack|
|802.1X for Ethernet Ports||
|MIMO Configuration||2 x 2 : 2|
|Supported Data Rates||
|RF Power Output** (Aggregate)||
|Channelization||20MHz, 40MHz, 80MHz|
|BSSID||8 BSSIDs per radio|